Home › New Equipment › Construction › Motor Graders › 770G/GP Motor Grader

770G/GP

Motor Graders | John Deere

Fort Kent Parts

207.834.6701

Change Location

Request Quote

Your Preferred Store

PRINT PAGE EMAIL PAGE

KEY MACHINE SPECS

Net Power: 190 kW (255 hp)
Operating Weight: 19 396 kg (42 760 lb)
Blade Pull: 15 501 kg (34,173 lb.)
Net Torque Rise: 64%

FeaturesSpecificationsResources

Engine

Ash-service intervals for the diesel particulate filter (DPF) are condition based and may not be necessary until the first engine overhaul. Machine application, regular maintenance practices, and type of lubrication oil impact intervals.
Exclusive cooling package eliminates stacked coolers. Pivoting coolers together with the hinged swing-out fan, access to the cores is quick and cleaning is easy.
Standard hydraulically driven cool-on-demand reversing fan slows when the engine is idling to reduce fuel consumption and bystander noise levels. Reversing fan automatically cycles at operator-selected intervals to eject debris from the radiator and cooler cores.

WorkTools

Jackscrew-adjusted side-shift wear inserts keep the moldboard tight and precise. Takes only minutes to return tolerances to factory spec.
Two-hour replaceable super-tough draft frame and circle wear inserts minimize maintenance labor.
Choose from front scarifier, mid-mount scarifier, or rear scarifier/ripper. There's also a front-lift option that simplifies adding a bulldozer blade or V-plow.

Serviceability

Large service doors open wide, and same-side daily checkpoints are conveniently grouped for easy ground-level access.

Structures

Exclusive ball-and-socket draft-frame pivot and seven-position saddle provide best-in-class blade setup and improved ditch cutting, ditch cleaning, and reach outside the tires.
Long-term durability is bolstered by larger-than-usual articulation joint roller bearings.

Visibility

Narrow center console and streamlined saddle bring the blade and front tires within focus.
On GP models control linkages are eliminated and large lower front windows further enhance visibility.

Grade Pro (GP)

For unsurpassed productivity with a grade-control system, opt for a GP model. Eight armrest-mounted fingertip-actuated controls, including steering lever, are arranged in the industry-standard pattern on each side of the steering wheel. No extra levers required for grade control.
Automated cross-slope simplifies holding a consistent slope by reducing operation to a single lever.
At the touch of a button, return-to-straight automatically straightens an articulated frame. For quicker work cycles.

Powertrain

Automatic differential lock stays engaged when travelling straight, disengages in turns exceeding 10 degrees, and re-engages when returning to straight. Although fully automatic, this feature can be overridden by the operator via toggle switch.

DRIVELINE

Engine Manufacturer John Deere
Engine Model PowerTech PSS 9.0L
Displacement, ltr (Inches³) 9 (548)
Engine Output - Net, kW (hp) 190 (255)
Torque Rise, % 64
Transmission Manufacturer John Deere
Number Of Speeds - Forward 8
Number Of Speeds - Reverse 8
Tire size - Standard 14.00 - 24
Service Brake Type Disc
Service Brake Actuation Hydraulic

DIMENSIONS

Overall Length, mm (ft/in) 8890 (29 ft 2 in)
Height Over ROPS, mm (ft/in) 3180 (10 ft 5 in)
Wheelbase, mm (ft/in) 6160 (20 ft 3 in)
Bladebase, mm (ft/in) 2570 (8 ft 5 in)
Moldboard Height, mm (inches) 610 (24)
Width - Moldboard, mm (ft/in) 3660 (12 ft )
Frame Circle Diameter, mm (inches) 1524 (60)
Thickness - Moldboard, mm (inches) 22 (0.88)
Moldboard Sideshift - Right, mm (inches) 683 (26.9)
Moldboard Sideshift - Left, mm (inches) 683 (26.9)
Shoulder Reach - Right, mm (ft/in) 2083 (6 ft 10 in)
Shoulder Reach - Left, mm (ft/in) 2083 (6 ft 10 in)
Circle Rotation, ° 360
Bank Angle, ± ° 90
Hydraulic Blade Tip - Forward, ° 42
Hydraulic Blade Tip - Rearward, ° 5
Moldboard - Lift Above Ground, mm (inches) 490 (19.3)
Turning Radius - Minimum, m (ft/in) 7.21 (23 ft 8 in)
Frame Articulation, ± ° 22

CAPACITIES

Fuel Tank, ltr (gallons (US)) 416.5 (110)
Hydraulic Tank, ltr (gallons (US)) 60.5 (16)

PERFORMANCE

Loading - Front Axle, kg (lbs) 4305 (9490)
Loading - Rear Axle / Tandem, kg (lbs) 12084 (26640)
Speed 8 - fwd, kph (mph) 45.5 (28.3)
Speed 8 - rev, kph (mph) 46.5 (28.3)
System Voltage, V 24
Pump Flow, lt/min (gallons (US) / min) 212 (56)
Relief Pressure, kPa (PSI) 18961 (2750)

WEIGHTS

Weight With Push Block & Ripper, kg (lbs) 19396 (42760)

Overview

Product Brochures

Download Product Brochure

Features

Engine

Ash-service intervals for the diesel particulate filter (DPF) are condition based and may not be necessary until the first engine overhaul. Machine application, regular maintenance practices, and type of lubrication oil impact intervals.
Exclusive cooling package eliminates stacked coolers. Pivoting coolers together with the hinged swing-out fan, access to the cores is quick and cleaning is easy.
Standard hydraulically driven cool-on-demand reversing fan slows when the engine is idling to reduce fuel consumption and bystander noise levels. Reversing fan automatically cycles at operator-selected intervals to eject debris from the radiator and cooler cores.

WorkTools

Jackscrew-adjusted side-shift wear inserts keep the moldboard tight and precise. Takes only minutes to return tolerances to factory spec.
Two-hour replaceable super-tough draft frame and circle wear inserts minimize maintenance labor.
Choose from front scarifier, mid-mount scarifier, or rear scarifier/ripper. There's also a front-lift option that simplifies adding a bulldozer blade or V-plow.

Serviceability

Large service doors open wide, and same-side daily checkpoints are conveniently grouped for easy ground-level access.

Structures

Exclusive ball-and-socket draft-frame pivot and seven-position saddle provide best-in-class blade setup and improved ditch cutting, ditch cleaning, and reach outside the tires.
Long-term durability is bolstered by larger-than-usual articulation joint roller bearings.

Visibility

Narrow center console and streamlined saddle bring the blade and front tires within focus.
On GP models control linkages are eliminated and large lower front windows further enhance visibility.

Grade Pro (GP)

For unsurpassed productivity with a grade-control system, opt for a GP model. Eight armrest-mounted fingertip-actuated controls, including steering lever, are arranged in the industry-standard pattern on each side of the steering wheel. No extra levers required for grade control.
Automated cross-slope simplifies holding a consistent slope by reducing operation to a single lever.
At the touch of a button, return-to-straight automatically straightens an articulated frame. For quicker work cycles.

Powertrain

Automatic differential lock stays engaged when travelling straight, disengages in turns exceeding 10 degrees, and re-engages when returning to straight. Although fully automatic, this feature can be overridden by the operator via toggle switch.

Specifications

DRIVELINE

Engine Manufacturer John Deere
Engine Model PowerTech PSS 9.0L
Displacement, ltr (Inches³) 9 (548)
Engine Output - Net, kW (hp) 190 (255)
Torque Rise, % 64
Transmission Manufacturer John Deere
Number Of Speeds - Forward 8
Number Of Speeds - Reverse 8
Tire size - Standard 14.00 - 24
Service Brake Type Disc
Service Brake Actuation Hydraulic

DIMENSIONS

Overall Length, mm (ft/in) 8890 (29 ft 2 in)
Height Over ROPS, mm (ft/in) 3180 (10 ft 5 in)
Wheelbase, mm (ft/in) 6160 (20 ft 3 in)
Bladebase, mm (ft/in) 2570 (8 ft 5 in)
Moldboard Height, mm (inches) 610 (24)
Width - Moldboard, mm (ft/in) 3660 (12 ft )
Frame Circle Diameter, mm (inches) 1524 (60)
Thickness - Moldboard, mm (inches) 22 (0.88)
Moldboard Sideshift - Right, mm (inches) 683 (26.9)
Moldboard Sideshift - Left, mm (inches) 683 (26.9)
Shoulder Reach - Right, mm (ft/in) 2083 (6 ft 10 in)
Shoulder Reach - Left, mm (ft/in) 2083 (6 ft 10 in)
Circle Rotation, ° 360
Bank Angle, ± ° 90
Hydraulic Blade Tip - Forward, ° 42
Hydraulic Blade Tip - Rearward, ° 5
Moldboard - Lift Above Ground, mm (inches) 490 (19.3)
Turning Radius - Minimum, m (ft/in) 7.21 (23 ft 8 in)
Frame Articulation, ± ° 22

CAPACITIES

Fuel Tank, ltr (gallons (US)) 416.5 (110)
Hydraulic Tank, ltr (gallons (US)) 60.5 (16)

PERFORMANCE

Loading - Front Axle, kg (lbs) 4305 (9490)
Loading - Rear Axle / Tandem, kg (lbs) 12084 (26640)
Speed 8 - fwd, kph (mph) 45.5 (28.3)
Speed 8 - rev, kph (mph) 46.5 (28.3)
System Voltage, V 24
Pump Flow, lt/min (gallons (US) / min) 212 (56)
Relief Pressure, kPa (PSI) 18961 (2750)

WEIGHTS

Weight With Push Block & Ripper, kg (lbs) 19396 (42760)

First Name*:	Last Name*:
Email Address*:	Phone Number*:
State*:	City*:
Model*:	Company*:
Additional Notes/Comments:

Category*:
First Name*:	Last Name*:
Email*:	Phone Number*:
State/Province*:	City:
Company Name*:	Company's State/Province:
Additional Notes/Comments:

Construction Equipment

Forestry Equipment

Compact Equipment

Hitachi

All Used Equipment

Fort Kent Parts

207.834.6701

Your Preferred Store

770G/GP

Motor Graders | John Deere

Fort Kent Parts

207.834.6701

Your Preferred Store

Request Quote

KEY MACHINE SPECS

Engine

WorkTools

Serviceability

Structures

Visibility

Grade Pro (GP)

Powertrain

DRIVELINE

DIMENSIONS

CAPACITIES

PERFORMANCE

WEIGHTS

Product Brochures

Overview

Product Brochures

Features

Engine

WorkTools

Serviceability

Structures

Visibility

Grade Pro (GP)

Powertrain

Specifications

DRIVELINE

DIMENSIONS

CAPACITIES

PERFORMANCE

WEIGHTS

Contact Us

EQUIPMENT

SERVICES

COMPANY